Packing plates properly can save you from dealing with broken dishes when you arrive at your new home. Even the best movers can't prevent damage if your plates aren't wrapped and packed correctly. Start by wrapping each plate in packing paper and securing the edges with tape. Place plates upright in a sturdy box with cushioning at the bottom and between each one. Fill empty spaces to stop them from shifting, seal the box tight, and label it as fragile.
Gather Packing Supplies
Before you start packing, collect everything you'll need. Get sturdy cardboard boxes, wrapping paper, bubble wrap, packing tape, and a marker for labels. The boxes need to be strong enough to hold the weight of your plates. Wrapping paper and bubble wrap protect your plates from chips and cracks. Tape keeps boxes sealed, and a marker helps you label everything so you know what's inside and where it goes. If you're working with movers in Simpsonville, SC, they’ll often provide packing tips like these to make sure your items arrive safely.
Prepare the Boxes
Start by reinforcing the bottom of each box with extra packing tape. Check that the boxes are clean and dust-free. Add crumpled packing paper to the bottom as a cushion. Pick boxes that fit your plates without leaving too much empty room. Once you've packed everything, seal the boxes tightly with tape to keep your plates secure during the move.
Wrap Plates Individually
Wrap each plate separately in packing paper. Lay a sheet of paper flat, place the plate in the center, then fold the paper over it completely. Tape the edges so the paper stays in place. Do this for every single plate. This stops them from hitting each other and getting scratched or chipped. Keep the wrapped plates standing upright in your box for better protection.
Layer Plates in Boxes
Put bubble wrap or packing paper at the bottom of your box. Stand your plates up vertically instead of stacking them flat. This spreads out the weight and lowers the chance of breaking. Add padding between each plate and around the sides of the box. Don't leave any empty spots where plates could move around. Tape the box shut and write "fragile" on it.
Fill Empty Spaces
Always fill gaps in the box with extra padding. Use bubble wrap, packing paper, or foam inserts to create a tight fit. This keeps plates from shifting around during the move. The extra padding absorbs shock from bumps and drops. Pay attention to corners and edges since these spots get damaged most easily. Taking time to fill these spaces gives your plates better protection.
Label Boxes Clearly
Mark each box with what's inside and which room it belongs in. Use a bold marker and write on both the top and sides so you can read it from any angle. You can also use colored stickers or numbers to make sorting easier. When boxes are labeled well, movers know which ones need gentle handling. Clear labels save time when unpacking and reduce the chance of items ending up in the wrong place.
Related Topics:
